SP‑Pristine Series II – PET Stretch Blow Moulding Machine

Product Overview

All-Electric PET Stretch Blow moulding machines, designed to match production rates ranging from 7000 to 12000 bottles per hour. The Fully Automatic Blow Moulding Machine has Close loop heating control and variable speed ventilators for temperature control facilitates this machine to produce consistent quality bottles at higher speeds. The servo stretching features of PET Stretch Blow Moulding Machines reduces the cycle time, while precisely controlling the primary as well as the final blowing.

Product Specifications

Description	Unit	SP-Pristine - 550
Description	Unit	SP-Pristine 05-1 / 02-2		SP-Pristine 06-0.6 / 02-2		SP-Pristine 08-0.3 / 03-1
Machine Specifications
Mould Clamp		Servo		Servo		Servo
Stretching Type		Servo		Servo		Servo
No. of Cavity	No	5	2	6	2	8	3
Production Per Hour	BPH*	8000	2000	9600	2000	12800	4800
Nominal Bottle Volume	ml	1000	2000	600	2000	300	1000
Max Bottle Dia	mm	85	105	70	105	52	85
Max Bottle Height	mm	350	350	350	350	350	350
Max Neck Dia	mm	30	30	30	30	30	30
Air Requirement
H.P. Air	CFM	240		195		166
Calculated @ 32 bar @ Machine Inlet		1000 ml @ 8000 BPH		600 ml @ 9600 BPH		300 ml @ 12800 BPH
L.P Air CFM @ 8 bar (Without Air Recovery)		33		35		40
Electrical Requirement
Connected Load Without Utility	kW	75		75		69
Estimated Power Consumption Per Hour #
		30–40%		30–40%		30–40%
Machine Dimensions
Length	mm	9200		9200		9200
Width	mm	2850		2850		2850
Height	mm	3450		3450		3450
Weight (Approx)	Kg	11500		11500		11500

* Specifications subject to change. *Nominal output. Actual output may vary as per preform weight, bottle volume and design. | #May vary as per preform weight, botile volume & design.

Description	Unit	SP-Pristine - 700
Description	Unit	SP-Pristine 06-2 / 06-1		SP-Pristine 07-1 / 03-2		SP-Pristine 08-0.6 / 03-2
Machine Specifications
Mould Clamp		Servo		Servo		Servo
Stretching Type		Servo		Servo		Servo
No. of Cavity	No	6	6	7	3	8	3
Production Per Hour	BPH*	9600	6000	11200	3000	12800	3000
Nominal Bottle Volume	ml	1000	2000	1000	2000	600	2000
Max Bottle Dia	mm	85	105	85	105	70	105
Max Bottle Height	mm	350		350		350
Max Neck Dia	mm	30		30		30
Air Requirement
H.P. Air	CFM	311		330		254
Calculated @ 32 bar @ Machine Inlet		2000 ml @ 6000 BPH		1000 ml @ 11200 BPH		600 ml @ 12800 BPH
L.P. Air CFM @ 8 bar (without Air Recovery)		35		38		40
Electrical Requirement
Connected Load Without Utility	kW	106		98		90
Estimated Power Consumption Per Hour
		30–40%		30–40%		30–40%
Machine Dimensions
Length	mm	9700		9700		9700
Width	mm	2850		2850		2850
Height	mm	3450		3450		3450
Weight (Approx)	Kg	12500		12500		12500

* Specifications subject to change. *Nominal output. Actual output may vary as per preform weight, bottle volume and design. | #May vary as per preform weight, botile volume & design.

Description	Unit	SP-Pristine 08-1 / 04-2		SP-Pristine 10-0.6 / 05-1		SP-Pristine 12-0.3 / 6-1
Machine Specifications
Mould Clamp			Servo		Servo		Servo
Stretching Type		Servo		Servo		Servo
No. of Cavity	No	8	4	10	5	12	6
Production Per Hour	BPH*	12000	6000	15000	7500	18000	9000
Nominal Bottle Volume	ml	1000	2000	600	1000	300	1000
Max Bottle Dia	mm	90	105	76	90	60	85
Max Bottle Height	mm	350	350	350	350	350	350
Max Neck Dia	mm	30	30	30	30	30	30
Air Requirement
H.P. Air @ 32 bar	CFM	339 (1000 ml @ 32 Bar)	314 (2000 ml @ 32 Bar)	258 (500 ml @ 32 Bar)	217 (1000 ml @ 32 Bar)	220 (300 ml @ 32 Bar)	248 (1000 ml @ 32 Bar)
L.P. Air @ 8 bar (without Air Recovery)	CFM	39	30	43	32	48	35
L.P. Air (after Air Recovery)	CFM	Nil	Nil	Nil	Nil	Nil	Nil
Electrical Requirement
Connected Load Without Utility	kW	92		92		92
Heating Load	kW	56		56		56
Machine Dimensions
Length	mm	10100		10100		10100
Width	mm	2850		2850		2850
Height	mm	3350		3350		3350

* Specifications are subject to change. *Output varies with bottle design and preform weight & design.

Description	Unit	SP-Pristine 10-1 / 05-2		SP-Pristine 12-0.6 / 05-2		SP-Pristine 16-0.25 / 08-0.6
Machine Specifications
Mould Clamp		Servo		Servo		Servo
Stretching Type		Servo		Servo		Servo
No. of Cavity	No	10	5	12	5	16	8
Production Per Hour	BPH*	15000	7500	18000	7500	24000	12000
Nominal Bottle Volume	ml	1000	2000	600	2000	250	600
Max Bottle Dia	mm	90	105	76	105	56	76
Max Bottle Height	mm	350	350	350	350	350	350
Max Neck Dia	mm	30	30	30	30	30	30
Air Requirement
H.P. Air @ 32 bar	CFM	420 (1000 ml @ 32 Bar)	388 (2000 ml @ 32 Bar)	306 (500 ml @ 32 Bar)	388 (2000 ml @ 32 Bar)	260 (250 ml @ 32 Bar)	209 (500 ml @ 32 Bar)
L.P. Air @ 8 bar (without Air Recovery)	CFM	45	33	49	33	59	40
L.P. Air (after Air Recovery)	CFM	Nil	Nil	Nil	Nil	Nil	Nil
Electrical Requirement
Connected Load Without Utility	kW	116		106		108
Heating Load	kW	80		70		72
Machine Dimensions
Length	mm	11100		11100		11100
Width	mm	3150		3150		3150
Height	mm	3350		3350		3350

* Specifications are subject to change. *Output varies with bottle design and preform weight & design.

Product Features

Preform Handling

Loading on Oven Mandrels using Turret Wheel System.

Heat Conditioning

Close Loop Heating Control (Auto Preform Temperature Control).
Variable speed ventilators for accurate Chamber Temperature Control.

Stretching

Servo Stretching in Dual mode in synchronization with Mould Clamp, to reduce cycle time.
Precise control of Preblow (Primary Blow) and Blowing (Final Blow).
Reduced Frictional and Inertia loss.

Mould Clamp

Electrical Mould Clamp using servo system.
Mould Compensation for faster and positive locking without vibration.
Synchronized with Stretching functions.

Energy Saving

No Low Pressure Air required. Blowing air is recovered and re-collected to be used for machine operations and remaining air to be fed back to booster compressor.

Product Application

Upto 8 Cavity - 6000 to 12000 Bottles / Hour

Watch Product Videos

Download Product Catalogue/Brochure

Select Product
PET Blow Moulding MachinesPVC Extrusion Lines

Job Title	Service Engineer
Experience	3–5 years
Education	Diploma / Bachelor’s Degree in Electrical or Mechanical Engineering
Salary	₹15,000 – ₹30,000 (In-hand)
Job Opening Date	20/11/2025
Job Closing Date	20/12/2025
Location	Vatva, Ahmedabad (Company will shift to Pirana, Ahmedabad location within 2–3 years)
Job Summary	We are looking for a skilled and dedicated Service Engineer with hands-on experience in service, maintenance, or production departments, specifically with Stretch Blow PET Moulding Machines. The candidate will undergo structured training and will later be responsible for travelling to client sites across South India for service support
Key Responsibilities	• Perform installation, commissioning, troubleshooting, and maintenance of Machines. • Conduct regular service visits and preventive maintenance at client locations. • Diagnose electrical and mechanical issues and implement effective solutions. • Maintain documentation of service reports, spare parts usage, and machine performance. • Coordinate with the technical team for escalations and ensure smooth customer support. • Provide on-site training and guidance to client operators when required. • Travel across South India based on service requirements..
Required Skils & Experience	• 3–5 years of experience in service, maintenance, or production roles. • Strong technical knowledge of electrical and mechanical systems. • Experience with Stretch Blow PET Moulding Machines is highly preferred. • Must have a proactive attitude and commitment to customer satisfaction. • Good problem-solving and troubleshooting skills.
Training Details	• The selected candidate must stay in Ahmedabad for 6 months to 1 year for detailed machine and process training. • Company will provide: o Flat Accommodation o Food Allowance o Other Basic Facilities & Support • After training, deployment will be for field service across South India.
How to Apply	Interested candidates may send their updated resume to hr@shyamplastic.com or contact us at +91 93279 4018.
Apply Now	Apply Now

Job Title	Automation Engineer
Experience	2–4 Years Required.
Education	Bachelor’s Degree in Electronics / Instrumentation / Electrical Engineering
Location	Vatva, Ahmedabad (Company will shift to Pirana, Ahmedabad location within 2–3 years)
Department	IT
Job Summary	We are seeking a passionate and skilled Automation Engineer to join our engineering team. The ideal candidate will have hands-on experience in PLC & Motion Control Programming, HMI development, and automation system maintenance. This role involves working closely with mechanical, electrical, and software teams to deliver reliable and efficient automation solutions for plastic machinery.
Key Responsibilities	• Maintain and troubleshoot automation equipment and systems. • Understand mechanical equipment functions and define I/Os. • Develop and debug PLC & Motion Control programs. • Design and configure HMI programs and user interfaces. • Provide remote online support for automation systems. • Implement and monitor data logging and analytics systems. • Collaborate with QA analysts and software developers to improve automation processes. • Apply mechatronics principles in system design and integration. • Exposure to robotics, AI, or machine learning is an added advantage.
Technical Skills:	• PLC, HMI, Motion Control Programming (Siemens / Mitsubishi / Delta or similar). • Knowledge of SCADA systems and data analytics tools. • Ability to read and interpret electrical and mechanical schematics.
How to Apply	Send your updated resume to hr@shyamplastic.com contact: +91 93279 40189.
Apply Now	Apply Now

Job Title	VMC Operator
Experience	4–5 Year
Education	ITI (Fitter / Machinist or relevant trade
Location	Vatva (Company will be shifting to Pirana, Ahmedabad in 2–3 years)
Job Overview	We are looking for an experienced VMC Operator with strong knowledge of machine operations, program adjustments, and precision machining. The candidate will be responsible for operating, setting, and maintaining VMC machines to ensure accurate and high-quality production as per drawings and specifications.
Key Responsibilities	• Operate and set VMC machines as per daily production requirements • Read and interpret engineering drawings and machining instructions. • Perform tool offset, program selection, and minor program adjustments. • Ensure optimal machine performance and report issues to supervisors. • Maintain production logs and follow standard operating procedures. • Ensure adherence to quality standards and safety guidelines.
Required Skills and Qualifications:	• ITI qualification with relevant trade. • 4–5 years of hands-on experience operating VMC machines. • Ability to handle machine setup, tool changing, and basic programming edits. • Strong understanding of machining parameters and measurement tools. • Good teamwork, discipline, and problem-solving skills.
How to Apply	Interested candidates may send their updated resume to hr@shyamplastic.com or contact us at +91 93279 40189
Apply Now	Apply Now

Job Title	IT & ERP Coordinator
Experience	1–2 Years
Education	BCA / B.E. in Related Fields
Location	Vatva (Company will be shifting to Pirana, Ahmedabad in 2–3 years)
Department	IT
Job Overview	The IT Executive will be responsible for managing day-to-day IT operations, providing user support for hardware, software, and networking issues, and assisting in ERP data management and troubleshooting.
Key Responsibilities	• Provide technical support to users for system, network, and ERP-related issues. • Basic knowledge of computer systems, printers, scanners, and network equipment. • Coordinate with ERP vendor or internal team for issue resolution. • Manage ERP user creation, access rights, and basic configuration. • Assist departments in data upload, report extraction, and master data updates. • Handle email configuration and backup management • Support software installation • Monitor internet connectivity and troubleshoot network issues. • Provide basic training and guidance to employees on ERP usage.
Required Skills and Qualifications:	• Bachelor’s degree / Diploma in related field. • 1–3 years of experience in IT support or ERP operations. • Basic knowledge of ERP systems. • Familiarity with Windows OS, networking, and basic SQL. • Troubleshooting and problem-solving abilities. • Communication and documentation skill.
Preferred Skills (Added Advantage)	• Experience with ERP implementation or support and MS SQL Query.
Why Join Us	• Opportunity to grow within a dynamic and technology-driven organization. • Hands-on experience in ERP implementation and management. • Supportive team environment focused on learning and development.
How to Apply	Interested candidates may send their updated resume to hr@shyamplastic.com or contact us at +91 93279 40189.
Apply Now	Apply Now

PET Blow Moulding MachinesFully Automatic

SP Pristine Series-II PET Blow Moulding Machine