Product Overview
These versatile Automatic Blow Moulding machines can be used to manufacture different kinds of bottles with neck diameter of 20 mm to 150 mm. The bottle / jar capacity can range from 40 ml up until 5000 ml.
Product Specifications
| Description | Unit | SP 5000 H | SP 5000 H PP | ||
|---|---|---|---|---|---|
| Machine Specifications | |||||
| Mould Clamp | Hydraulic | Hydraulic | |||
| Stretching Type | Pneumatic | Pneumatic | |||
| No. of Cavity | No | 2 | 1 | 2 | 1 |
| Production Per Hour | BPH* | 800–900 | 400 | 400–500 | 250–300 |
| Nominal Bottle Volume | ml | 1000 | 2000 | 1000 | 2000 |
| Max Bottle Dia | mm | 130 | 200 | 130 | 200 |
| Max Bottle Height | mm | 350 | 350 | 350 | 350 |
| Max Neck Dia | mm | 60 | 120 | 60 | 120 |
| Air Requirement | |||||
| H.P. Air | CFM | 42 | 26 | ||
| Calculated @ 32 bar @ Machine Inlet | 1000 ml Water Bottle @ 800 BPH | 1000 ml Water Bottle @ 500 BPH | |||
| Electrical Requirement | |||||
| Connected Load Without Utility | kW | 13 | 28 | ||
| Machine Dimensions | |||||
| Length | mm | 2750 | 3700 | ||
| Width | mm | 2050 | 2020 | ||
| Height | mm | 2600 | 2600 | ||
| Weight (Approx) | Kg | 1600 | 1700 | ||
*Specifications are subject to change *Nominal output, Actual output may vary as per preform weight, bottle volume and design.
Product Features
Mould Clamping
- Hydraulic mould clamping system to enhance power efficiency. It saves air consumption and hence reduces production cost.
- Unique mechanical lock system for positive locking.
Heating
- Close loop heating system and auto chamber temperature control (to compensate variation in preform heating due to ambient temperature).
- Positioning of heaters is better, ensuring faster and simpler heating. Individual heater position is adjustable in both axes to achieve optimum heating.
- Air ventilation with controllable venting in heating chamber (for better heat penetration control).
- Start-stop index type oven to minimize variation in temperature of both preforms coming out of chamber at a time.
Product Range
- Versatile range to produce 40 ml to 5000 ml bottle / jar. Neck diameter ranging from 20 mm to 120 mm. Due to hydraulic operations, mould can be stopped where required. In case of small diameter bottles, this increases production rate and reduces production cost.
Safety
- Two hand operations (till mould close function is complete) to prevent accidents.
- ELCB in main supply for protection against electric shock.
- Individual MCB's for all heaters.
Product Application
Versatile range to produce 40 ml to 5000 ml bottle or jar.
Neck diameter ranging from 20 mm to 120 mm.
Watch Product Videos
SP 5000-H Bottle
SP 5000-H Jar